WG 4903 Messed up after capkit.

thefader

New member
Joined
Jun 21, 2010
Messages
953
Reaction score
1
Location
South Dakota
I just recapped my WG4903. After turning it on, the colors are super dark and messed up. I had a hell of a time getting the anode cup back on. If only one of the anode clips got inside the hole could that cause this? Here is the picture. Those light and dark bars roll down the screen.
 

Attachments

  • tiger.jpg
    tiger.jpg
    95.5 KB · Views: 24
Last edited:
Also, I noticed there isnt much neck glow now either. Any ideas what I did this time?
 
Turned the black level up a bit. It looks like there are still streaks across the white high score letters. (This was happening pre-cap kit, but the dark/light bars scrolling across the screen / messed up colors were not.)

Any other ideas? Thanks guys.
 

Attachments

  • tiger2.jpg
    tiger2.jpg
    101.3 KB · Views: 14
This still doesnt correct the scrolling bars or messed up colors. Maybe I'll have to pull it again and check every cap I installed.
 
Back
Top Bottom