WG 4800 Plays Blind, 139 at B+ Freakin' Me Out!

whoamonga

Active member
Joined
Feb 18, 2008
Messages
738
Reaction score
56
Location
Houston, Texas
So I had this thing working... real aggrevating. It used to play blind cause of HV shutdown, but then I did a cap kit and it only had bad vertical deflection, then I reflowed pins and width coil and viola! worked! I let it sit for about a month, put it back in the Monaco GP cabaret and whomp whomp... no game.

I have 138-9 vdc at the B+, measured at the blue wire connected to the side ceramic resistor, and grounded to the metal on the chassis.

Any ideas on where to go next?
 
check the 130v line and make sure you have continuity all the way across, checking for cold solder along the way.
 
Back
Top Bottom