wg 4600 multi board issue

xcelite

New member
Joined
Aug 25, 2009
Messages
72
Reaction score
0
Location
ontario, Canada
I have a couple 4600's with the same issue when using a 48-1 board there is a vertical curl about 1/2" down (looking at it like standard oriantaion). this only happens on the menu screen because its the only screen that fills top to bottom. both monitors have been capped and new tube's fully adjusted i think that its the boards but not sure anyone have the same issue. thanks
 
make sure the black ground wire isnt next to the RGB but on the smaller 3 prong connector next to the sync wire.
 
Back
Top Bottom