WG 4600 Flyback

brocksampson

Member
Joined
Mar 28, 2010
Messages
108
Reaction score
3
Location
Elkhorn, Nebraska
I have 2 4600s. One is workingish. I can hear the flyback arching and the picture is a little jacked. So I was going to pull the flyback off the other one that is totally dead. The dead one has a cracked neck board so I don't want to transplant that. How do I remove the focus wire from the neckboard without damaging it?
 
The wire connects to the back side of the socket. Just below where it goes in - on the back of the socket - there is a little piece that can be popped off with a small flat-head screwdriver. Then you can just desolder the wire...
 
Back
Top Bottom