WG 2775 chassis

mammyrat

New member
Joined
May 20, 2007
Messages
245
Reaction score
2
Location
Columbia, South Carolina
I am replacing the flyback and doing a cap kit on my WG 2775 chassis. I have a few questions. The only other flyback I have replaced I took a cap of the neck socket and unsoldered the old flyback wire and re-soldered the new one but this socket doesn't seem to want to come apart. I don't want to break it. Can I just splice this wire with a butt connector? Also while doing the cap kit I noticed a resistor badly burnt looking at location R120 close to the yellow transformer. The schematic at WG website is not clear enough, and the color bands are all burnt away so I can see the wire wrap inside. Does anyone know the value of this resistor?
Thanks
 
Back
Top Bottom