WG 25" NOS issue - Cap Kit?

Stoonfer

New member
Joined
Apr 17, 2008
Messages
82
Reaction score
0
Location
New Hampshire
Picked-up a NOS Wells Gardner 25" monitor awhile back and from day 1 I've had the issue of the earth's magnetic interference distorting the color. I've had this on one other monitor before and a slight turn either way usually resolved the issue. This one is waaaaay off and turning it or degaussing it does not help.

Has anyone had any luck with this issue being resolved after a cap kit?
 
Also, sometimes you have to degauss the crap out of the monitor and all metal near it. That would include the CP, Marquee brackets, marquee light, etc, etc... Seriously, some guys have had to degauss their monitors in 5 to 10 minute sessions and do it a half dozen times to clear things up.

Edit: is it uneven spots, or are the colors completely off? As in RGB wired wrong?
 
i had one once that had been dropped.. half the scren was always off-color...

after tinkering forever i came up with that it had beeen dropped hard and that bowed the phosphor screen inside the tube therefore it would never be right..



On yours id seriously degauss the krap out of it, if no good you could try moving the yoke in/out and see if that helps...
 
Back
Top Bottom