wells k7401 hookup

hambuntu

Member
Joined
Feb 7, 2008
Messages
109
Reaction score
0
Location
Huntsville, Texas
i am running a w.g. k7401 and installing in a new cab. i tried my sinc on both vert and horz. not much luck. then i tied them both together, jumped from vert to horz. got some immage with a lot of trash. i am lookin at the schematick and i see grnd vert and horz on the three pin below the primary six i have been working with, do i need a jumper? am i on the right track? do i just keep tuning?
 
i am lookin at the schematick and i see grnd vert and horz on the three pin below the primary six i have been working with

Clarify that statement a little..... doesn't sound right at all.

Should be something like -

RED, GREEN, BLUE, GROUND, skip, skip, skip, skip, SYNC

Your SYNC wire should be on the last pin of the three pin set.
 
Also make sure you have the game running in standard res.

Dip Sw 5
Dip switch 1 (ON): Low Resolution
 
standard res

standard res. How can i check that, i have no book for this board and that is causing most of the issues. Or is it controlled on the mon. Thanks for the help i haven't messed with a arcade cab in a few years and i tend to forget more than i retain. thanks in advance for all the help.
 
If you have a &401, then you need it on standard-res. if a 7501, then you need it on medium-res.

Check Dip Switch #1 of Dip Switch Bank 5 to check it's position.

ON = Standard-Res
OFF = Medium-Res
 
re

i see 2 5 switch banks on this board i have changed the num 1 on both sepratly and it has not changed my situation. one bank is at the front of the board the other is near the video card is thair another bank i am missing, maby under the card?
 
No, but if you look at the board next to each bank, one will say SW5. That is the one to change.

Let's see a pic of your video connector...
 
.pdf

sorry thair were 4 switches per bank not 5, and it turned out to be the number two switch, a soon as i changed it i had video. thanks for all your help. why dont we have a place to post board manuals in .pdf format you know how handy that would be. i would scan and post what i have, anyone else game?
 
sorry thair were 4 switches per bank not 5, and it turned out to be the number two switch, a soon as i changed it i had video. thanks for all your help. why dont we have a place to post board manuals in .pdf format you know how handy that would be. i would scan and post what i have, anyone else game?

There are many places already for that. I have 22 different bookmarks I can check for info. Here's just one:

http://arcarc.xmission.com/

You can submit any that are not listed.

As for your Golden Tee, the manual is here:

http://www.itsgames.com/itsgames/Support/Manuals/
 
Back
Top Bottom