Wells Gardner D9200 (switching from vga to cga)

Luddite

Member
Joined
Aug 8, 2009
Messages
667
Reaction score
11
Location
Santa Cruz, California
I want to switch from VGA to CGA/EGA on this Wells D9200. I know I need to move the connector over to the cga/ega spot at the top of the picture. Instead of the VGA connector I use those pins on the left but what is the pinout exactly for that? There is 6 pins and then 3 pins for a total of 9. What goes where? Is there anything else I need to change to go into CGA/EGA mode?
Thanks for the help!

pinout.jpg
 
Back
Top Bottom