Wells Gardner D9200 Out of Range

Kramertheman

New member
Joined
Sep 29, 2015
Messages
2
Reaction score
0
Location
Harrisburg, Pennsylvania
I have been running a Dell XPS PC in a cabinet I built probably close to 10 years ago. I put a brand new Wells Gardner D9200 in it at that time. It has worked flawlessy for all that time. I finally got around to updating the PC to an HP Z200 and now the monitor displays an out of range message and I can't get the cabinet to work with the newer PC. The original Dell XPS Gen 2 still works fine when I hook it back up but the more intensive emulators run slow or not at all.

I verified the old Dell is running at 600 x 800 res and 32 bit color. I verified the newer HP z200 is running at the same 600 X 800 and 32 bit color albeit on a different desk top monitor. If I hook up the HP Z200 to the cabinet with the Wells Gardner D9200 I get the out of range message.

I've tried connecting a number of different laptops and desktops to the cabinet but the only one that doesn't display the out of range message is the original Dell XPS gen 2 that I have been using for a long time. It's OK for some things but just too slow for like ps2 or dreamcast emulators. How can i get my HP Z200 to work with the Wells Gardner d9200 monitor? Would swapping out the video card from the dell to the HP work? I like the Wells Garder D9200 , it looks great.

Any suggestions greatly appreciated.

Kramertheman
 
Wells Gardner d9200

The "other" PC's are are using a screen refresh of 60hz like the monitor call s for and they still display out of range. I have tried 800X600 resolution as well as 640X480 and neither works on any of the PC's except the original Dell XPS. Any other suggestions of what to look at?

Kramer
 
Back
Top Bottom