Wells Gardner 13K7203 - Cap Kit & Flyback, powers on but nothing on screen

john2654

Well-known member

Donor 3 years: 2011, 2020, 2024
Joined
Mar 30, 2010
Messages
6,426
Reaction score
1,272
Location
Rhinelander, Wisconsin
Wells Gardner 13K7203 was working fine, but flyback was going. Did a capkit and flyback. Now it powers on (can see neck glow), but nothing shows up on the screen.
Ughhh.
 
Last edited:
Gets static when powering on and off. So it's not dead.
Tried a video tester, so it's not the machine.
 
I think you'd get some image even if your +B or HV were low but did you measure either?

Also basic thing but have you tried adjusting the screen and black level? If you did, then do see the raster when turning the screen up all the way?
 
Last edited:
Yeah I tried adjusting the screen pot on the flyback and black level on remote board.

Cap kit came with 2 tantalum capacitors. Originals were the standard style capacitors.

I'm going to try putting original flyback and original 2 capacitors instead of the tantalum capacitors back in for the heck of it.
 
Back
Top Bottom