weird neotec nt27-e problem

GMZombie

Member
Joined
Oct 4, 2003
Messages
104
Reaction score
2
Location
Wayland, Michigan
ok i have recapped, re flybacked, hot, fet, and ic101 replace and the monitor will power up but i cant fine tune the b+ to 113.5 like it should be. i get to about 110 or so and then it jumps up and goes into hv shutdown. now i have even tried to leave it at 110 but it will eventually jump up and hv shutdown? sound like a bad pot or something else?
 
You could try tweaking your HV shutdown pot.. but I wouldn't do it without a HV probe to monitor how high the HV is going...

Xrays are bad.. mmkay :)
 
Back
Top Bottom