Wei Ya 826H Missing Red

jayleone

Active member

Donor 2015-2016
Joined
Jul 16, 2009
Messages
1,117
Reaction score
10
Location
Providence, Rhode Island
I just installed a Wei Ya 826H chassis as a replacement on a 25" WG K7000. However, the picture seems to be missing all Red. I've tried playing with the red pots and nothing. I've also tried the chassis in another tube and the same problem. Any ideas? Anyone have schematics to this chassis?

Thanks!
 
Not much help but assuming you bought this brand new send it back and get a new one. You shouldn't have to screw with a new chassis. If you feel you need screw with it for starters swap the RED input with (say green). See if the pot makes any adjustment on Green.
 
Last edited:
I just installed a Wei Ya 826H chassis as a replacement on a 25" WG K7000. However, the picture seems to be missing all Red. I've tried playing with the red pots and nothing. I've also tried the chassis in another tube and the same problem. Any ideas? Anyone have schematics to this chassis?

Thanks!

Send me an email to [email protected] and I'll send the schematic.
 
Back
Top Bottom