[Wei-Ya] 25" Monitor Chassis Question

iN33DCaTNiP

Well-known member
Joined
May 8, 2016
Messages
1,483
Reaction score
47
Location
San Diego, California
I bought a 25" wei-ya univ chassis off fleebay plus a iso to see if this thing actually works..
I tried 2 boards on my wg 25" tube (had a 25k7401 chassis originally. cant find one anywhere)..

Edit, plugged in wrong board lol ( fail)

Game#1: SF2WW
MCInA99.jpg
S8kc3of.jpg


bad lighting in garage but in person the tube that's been sitting on shelf for who knows how long looks dam sharp and vivid in person.

with sf2 it seems, could be because its a univ chassis, the
1p is cut off a bit and players names/ko bar is centered..

any1 else experience anything similar ? gonna try some more fooling around with it tomorrow...
 
Last edited:
Updated with some results

what I have found out is that, I believe these chassis are shipped with b+ cranked up too high...

RIVI7Dj.jpg


my readings from WG 25" tube ( 25k7401 ) are:
VR: 8.6
HR: 3.1

uR6FMKV.jpg


Game1: umk3, had to turn b+ all the way down
Game2: sf2ww, had to turn it up 1/4 from all the way down
Game3: Neogeo, using ms3 cart same setting from game #2

if I fool with it some more, I can squeeze it in enough to where I can see whole game screen to where its playable.. I would have to adj this to w/e
game I use with this chassis on this tube

D52auCf.jpg


that being said, I'm very happy with this item. the other pots on this chassis are pincushion and v-line. their are 2, seperate red wire jumpers
that I have no idea what they do...so I left those alone...
 
Back
Top Bottom