Warlords Jamma Adaptor

billybob2236

Active member
Joined
May 15, 2006
Messages
2,492
Reaction score
7
Location
GREEN BAY, Wisconsin
Someone have a pinout to make one? I dont know if crazykong is right because it has a +22v, i would guess it manes +12, and I would guess that a sound amp would be needed since it used an ar board?

There is no real pinout in the manual. Just want to be sure when Power up this board as they are few and far between.

http://crazykong.com/pins/Warlords.pin.txt

-Jake
 
I made one awhile ago and can send you scans of my notes for guidance (they are not written as a "how to") and a photo of the one I built. Send me a pm with your email address. One word of caution - always check those third party pinout diagrams. I'm not sure about the pinout you have but I have found several to be inaccurate. The age of the information does not make it accurate.

As far as the audio, awhile ago I got a set of amplified stereo PC speakers and use that for any adapter that needs amplified audio. I used a three pin KK series connector (L / GND / R) so if I reverse the connector no harm just swaps th left and right channels.

I used LEDs for the four lighted pushbuttons. Rather than have four 5K pots, I just have one and used a small four position dipswitch to choose which input gets the 5K pot. I used my JAMMA test panel buttons and switches and you can map them to whatever ones you choose.

I like the JB-3 fingerboard from Jammaboards - it is a great foundation for building jamma adapters especially since all of the connections are marked.

It works great and I have repaired several Warlords PCBs with it.

Bill
 
Last edited:
yea i am looking to test and maybe fix my board, It is untested and I want to fire this baby up and see if it works. I have a cab I can put it in to make a 4 player cocktail game. It not original but it will work for me.

-Jake
 
Here are the pics of my adapter - hope it helps.

I also responded to emails with a scan of my notes - too large to post here.

Bill

DSCN1870.jpg

DSCN1868.jpg
 
Thanks bill I will let you know how it goes. I might need some advice on how to fix it up, as i am assuming it doesn't work since I dont remember buying it.

-Jake
 
Back
Top Bottom