wanting to know pinouts on 2 games?

needhelp

Active member

Donor 3 years: 2016, 2021, 2024
Joined
Jul 8, 2009
Messages
1,018
Reaction score
7
Location
Indianapolis, Indiana
I was wondering if anybody knows what the pinouts are on Street Fighter II World Worrier and VS Super Mario Brothers unisystem boards...I thought the street fighter II was a common jamma, but I guess not...I got ahold of a VS unisystem jamma adapter from mike's arcade. went to hook it up and it did not work.. So, my guess is the pinouts are not right on the street fighter II to VS super mario brothers...If somebody could help me with this problem that would be great...


thanks,
need help
 
I am still laughing as I type this...:D


World Warrior is Jamma+ and should work but I believe it does need the -5vdc.

I'm thinking this might be the pin out you are looking for for the super mario bros

http://www.crazykong.com/pins/NintendoVsSystem.pin.txt

Street fighter 2 should be jamma + IIRC but basically it should work minus a couple of buttons in a standard jamma set up. Depending if it needs -5 for the sound it may also have no sound in some jamma harnesses. Not sure.



I want to thinkg the both of you for your response...I checked...it still did not work..I I think it was not wired right...I looked and found where there was a 36 pin harness and a 44 pin harness that was not being used...So, I will not be able to do...


thanks,
need help
 
street fighter 2 (world warrior) takes a standard jamma harness to the main board, plus a separate 10 pin harness off the smaller board to the kick buttons
 
street fighter 2 (world warrior) takes a standard jamma harness to the main board, plus a separate 10 pin harness off the smaller board to the kick buttons

it is not hooked up...I also have a 36 pin harness that is not hooked up either..the only thing that is hooked up is the jamma harness...I don't know why the 10 pin is not hooked up..I have the kick buttons and they are working with the jamma harness...

thanks,
need help
 
need help?

I am still having trouble getting super mario brothers to work on my jamma cabinet...I put it on another one and that one did not work either...the game was bad dudes and it has a jamma harness...I bought a vs jamma harness and for whatever reasons I cant get it to work..I plugged it in and all I get is a blank screen..no sound no nothing..I thought the vs harness is a plug n play to any jamma cabinet..If anybody could help me out that would be great..

thanks,
need help
 
Back
Top Bottom