Wanting to know how to use bill validator

needhelp

Active member

Donor 3 years: 2016, 2021, 2024
Joined
Jul 8, 2009
Messages
1,018
Reaction score
7
Location
Indianapolis, Indiana
I bought a mars bill validator for my touchmaster thought it is a plug n play thing. Well when I hooked it up it won't give me the right amount of credits when I put it in. It gives me the credit the machine is setup for. Am I doing something wrong.

Thanks
 
Go into the machine's software setup and set the number of credits for a dollar bill. Should be shown in the Touchmaster manual.
 
Go into the machine's software setup and set the number of credits for a dollar bill. Should be shown in the Touchmaster manual.

Does anybody have a PDF cope of the amual or the dip switch setting for the bill validator

oh, when I put max credit in at 1 dollar and my max credit is 24. It will give me 24 credits for a Dollar. Ifmax credit was 1 then a put dollar in and it will only giveme 1 credit not 4 or 5

Thanks
 
Last edited:
Back
Top Bottom