Wanting any game kit for a 19" cut corner dynamo cab

kjeffery

New member
Joined
Nov 15, 2009
Messages
4,502
Reaction score
49
Location
Walcott, Iowa
Rating - 100%
40   0   0
Wanting any game kit for a 19" cut corner dynamo cab

Well I got a 19 inch cut corner cab that has been sanded down and painted with new t molding, its actually a nice looking cab just sitting in my garage doing nothing, i was going to make a mame but changed my mind, i was wondering if i could get some parts for cheap to make it into a dedicated game, i would need the control panel and pcb for that game and any art for it would be nice too
 
I don't think you can find any kit to put into it that would be worth the effort... You wil spend way too much money in parts and shipping to make it cost effective.

You would be much better off passing it along to someone who would want to kit it to something they want.

Now if you just want to build it to something and keep it, thats different.
If you really want to save it, I have, pcb, mrquee, monitor bezel and control panel for a commando.
 
I don't think you can find any kit to put into it that would be worth the effort... You wil spend way too much money in parts and shipping to make it cost effective.

You would be much better off passing it along to someone who would want to kit it to something they want.

Now if you just want to build it to something and keep it, thats different.
If you really want to save it, I have, pcb, mrquee, monitor bezel and control panel for a commando.

as in kit i just meant a standard jamma game i can just get the pcb and a cut corner control panel that goes with the game, i can get the art for cheap, i have a time killers pcb and art if anyone has a time killers cut corner control panel, basically i just need pcb and control panel and everything else i can get for cheap and i would like for it to be jamma
 
I built one of these up a while ago. Mine has Darkstalkers in it only because I already had all the parts from a trashed one. I redid the control panel with a Capcom diamondplate overlay so its generic enough to apply to almost anything.

If it were me...don't worry about side art. Just keep the cabinet itself generic/black, use a street fighter layout (for most compatibility) with a more or less generic layout, then jamma it. You can pop in any jamma board, or a multi if you want (which is what I would do).

If you want to stick with one game - find a game you want or like or at least enjoy playing, just going with whatever someone has available is inevitably going to get swapped out if you find you don't enjoy it. Theres tons and tons and tons of jamma boards out there and even so, there's tons and tons of xyz game to jamma adapters, so think of a game you'd really like to have THEN put the effort into making it happen!
 
Back
Top Bottom