Wanted: EPROMS

xray2

Member
Joined
May 17, 2008
Messages
815
Reaction score
7
Location
California
Rating - 100%
16   0   0
Looking for a good quantity (200+) 27C64 - mixed speeds ok

Shoot me a PM if you have some you're looking to sell.
Prefer cleaned / erased with straight legs over pulls.
 
Hey Riptor, I'm looking for several HUNDRED 27c64 eproms. If you score a bunch please shoot me a PM and we'll work something out. I managed to get about a 100 to tide me over while I do some testing.
 
Do they have to be C or will regular 2764 work? I will let you know if I find any in the warehouse this weekend.
I have access to a second warehouse that will likely have plenty of these but would be a couple weeks before I could get anything in hand. Unfortunatly its an extremely busy weekend/week for me. Maybe shoot me a PM mid week as a reminder and I will see what I can dig up if I dont find them this weekend.
 
I don't have that quantity...

I'm slowly selling out of the large stash of 27C512 and 27C4001 chips I had... I do have a lot of 27C801, 2732, and 2532 (400!) now...
 
Either 2764 or 27c64 will do fine as my setup can program both. I am looking for speeds of 200ns or better. The older 300, 400 and 450 will not work for this application.
 
I just picked up 365 2764 but I dont think any are 200ns. There are a few -25's but most are -35 and -45.....sorry.
However, I can get them for you in whatever qty you need. PM me number you need and a price your looking to pay per piece. Also let me know if there are any specific manufactuer you need and whether you need nos or pulls.
 
Back
Top Bottom