wanted - cr-23

Well if you want to make your own, I will give you a neck board from a tv with the correct pinout. The diagrams are online. I need a cr31, since the one I was building was destroyed when I was drunk and tried to shrink the heat shrink tubing in the oven. 500 deg is not 200 deg. My house smells like plastic.
 
I just built a CR31 about two days ago. I used one of my CR5s and a neck-board socket from a bad Sharp monitor. But any 8 pin socket would work. Do a search on the CR23. There are several good posts about it that include diagrams and the BK manual.
 
Back
Top Bottom