Wanted: Atari 22/44 Pin Edge Connector Housings

Wldfire

Well-known member

Donor 5 years: 2011-2014, 2016
Joined
Oct 11, 2011
Messages
1,319
Reaction score
139
Location
Tahsis, BC, Canada
Rating - 100%
72   0   0
Hi there, I am rebuilding my Battlezone Wiring harness and am looking for some used or new 22/44 pin Edge Connector housings for it. I need two but would be interested in more then just the two.
Also looking for other used/new edge connector housings you might have laying around.
Please drop me a PM.
Thank You Kindly
Ken
 
So you want the metal part with wire handle, yes? :)


Hi, Looking for the plastic housing that you put the crimp connected ends into like this one.
Thanks :)
Ken
 

Attachments

  • bzedge1.jpg
    bzedge1.jpg
    19.4 KB · Views: 22
  • bzedge2.jpg
    bzedge2.jpg
    22.3 KB · Views: 19
Not sure about Battlezone, but I know my Centipede has an AMP connector. I didn't think they were compatible with the Molex ones Bob sells.


The AMP connectors that you find in some Atari games are the same pitch as the Molex connectors Bob carries. As far as I know the pins are not available for the AMP housings so I just replace them with the Molex variety. It takes some time due to the repinning but works great after you are done.
 
Back
Top Bottom