Wanted: Allied Leisure flipper coil

ELutz

Well-known member

Donor 2011
Joined
Nov 3, 2007
Messages
7,825
Reaction score
766
Location
LOUISVILLE, Kentucky
Rating - 100%
144   0   0
I'm finishing up an Allied Leisure cocktail pinball called Hearts Spades. I have one burnt flipper coil and can't find a replacement. Anyone have a spare they want to sell. I know of two Allied Leisure coils I can use (I'm sure there's probably more).....I'm not too familiar with Allied Leisure stuff. Here's the two I know will work...

315-1-1800
2.7ohms/17ohms

320-1-1700
2.7ohms/30ohms

I've also found Allied Liesure "messed" with their numbers...
Example:
315-1-1800
315-01-1800
315-01-18
315-1-18
These are all the same coil.

If anyone has a spare or knows of other coils I could use.....please let me know. Thanks!

Edward
 
Got any pics of yours? I am just starting my Hearts Spades cocktail project. What all did you have to do to yours?

It's actually not mine. It's a repair job that's been setting around the shop for several months. I've been dreadding it, actually.....Allied Leisure stuff can be a nightmare to fix. This one's actually in beautiful cosmetic condition. Luckily it wasn't too bad off. When I first fired it up...it would light up and pretty much lock from there.....no test mode...no demo mode....displays stuck in all zero's.....no coinage....I opened it up and immediately saw issues. The main filter cap for the 5VDC supply was (literally) disintegrating. Dropped in new caps...and she can roaring back to life. The ball in play display is acting funny....it will read 0, 1, 2, 0, 4, 5.....something's up with it not displaying 3. It's acting like it's the 74148 encoder. I've got one of those coming in this week, so I'll know then. There's a slight chance it could be the display boards 50-pin connector. One burnt flipper coil and that's it. All in all, I got kinda lucky.

If you haven't checked yours yet.....go through that 5VDC supply. They are notoriously problematic.....and hope none of those funky PIA's/processors are bad.

Edward
 
Back
Top Bottom