Wanted 2 Robotron Joystick handles

p1001

Well-known member
Joined
May 23, 2007
Messages
1,934
Reaction score
352
Location
Illinois
Rating - 100%
101   0   0
I'm in need of 2 red ball long joystick handles for my Robotron project. Please PM if you can help.

Thanks, Hans O
 
Sold my last set of 4" shafts a few weeks ago. if you can't find them and want to settle for some 3-1/2" shafts, let me know. I have a bunch of them...
 
Thanks. I have a bunch of 3-1/2" also. I do have 5 or 6 long handles that came from Wico but they have multiple grooves for the e-clip and I can't for the life of me figure out how to make them work with the leaf bases.

Sold my last set of 4" shafts a few weeks ago. if you can't find them and want to settle for some 3-1/2" shafts, let me know. I have a bunch of them...
 
Thanks. I have a bunch of 3-1/2" also. I do have 5 or 6 long handles that came from Wico but they have multiple grooves for the e-clip and I can't for the life of me figure out how to make them work with the leaf bases.

Post pictures with them next to a 3-1/2" stick and maybe we can help. Plus I don't recall those sticks from Wico and want to see them.
 
Here you go. The long stick did come from Wico.

IMG_0932.jpg


IMG_0934.jpg
 
Thanks for the pics. Those won't work in what you want by default. The difference between the 4" and 3.5" is the length of the shaft on the larger diameter part. That stick is either to make it fit into other bases like the P360 or should of come with a metal piece about .5" in length that goes below larger diameter part before it touches the washer/grommet assembly.

Ask divemaster12(sp?) to see if he can order 2x Happ part number 50-0337-00 for you. They cost like a $1 each. That should solve your problem.
 
Thanks to Mylstar my problem is solved. See pics below for the solution.

IMG_0942.jpg


IMG_0944.jpg
 
Back
Top Bottom