Vs to PC-10 gun conversion

Raven

New member
Joined
Apr 30, 2006
Messages
3,539
Reaction score
37
Location
Argyle, Texas
I've been asked about this a couple of times since I did it awhile back. It took me forever to find the information myself the first time, so I actually made notes! Anyway, here's it is:

From gun:

WHITE----Trigger
BLUE-----Hit
YELLOW---+5V

PINK-----GND (signal)
GREEN----GND (power)
BROWN----Alarm (not used)



This is for single monitor PC-10

From Harness:

N--------TRIGGER
P--------HIT
R--------+5V
18-------GND
V--------GND

Gun connector goes to the 12 pin molex connector, instead of the 15 pin one like on Vs games.

White wire is TRIGGER (goes to N), Blue wire is HIT (goes to P) Yellow wire is +5v.
Pink wire is SIG GROUND, Green wire is POW GROUND, brown wire is for ALARM.

Harness wire at N is brown, P is red, R will not have 5v on it. Have to pull that from coin door harness.




This is for Dual monitor PC-10

From Harness:

17--------TRIGGER
18--------HIT
19--------+5V
14--------GND (gun)
16--------GND (alarm)

These are on the small 20-pin connector.
 
Back
Top Bottom