VS SMB wiring help needed

hucklebuck73

New member
Joined
Nov 21, 2006
Messages
4,682
Reaction score
13
Location
salt lake city, Utah
Ok so the VS I got was swapped to JAMMA (it came with of all games, Rough Ranger) well I have finally got all the stuff to swap it back to normal. The issue is the harness, I have a good harness for VS but all the wiring has changed to fit the JAMMA. What would be the best way to start from the PCB and start hooking it up. I of course was hoping it'd be easy swap as my VS harness has all the right wiring and molex connectors, but of course the person before has changed all that. Damn I wish they would've left the stuff there for an easy swap....LOL Any help would be great. BTW this will be my first time to wire items to items..

Ive looked at pinouts and damn if i'm not lost on some of it...
 
Last edited:
I have two VS. Unisystems. I was going to pull them out tonight anyways. I'll try and grab some pics while I'm in there.
 
Sorry I haven't had time to post anything. Working voluntary OT just to make ends meet. =\ He's probably right though about the manuals.
 
Back
Top Bottom