VS. SMB Roms and PPU

It took me a while to find this one myself. Just a heads up on SMB. You also need to have 2 CPU's installed for it to work. If you can find an exitebike (japan)with PPU the PPU is the same. There is a fellow on here that will burn the ROMS for you if you get the PPU.
Best of luck.

http://johnsarcade.com/nintendo_vs_ppu_info.php
 
Last edited:
Frankenpora,

Thanks for the info. I am actually trying going to use my excitebike VS. board for SMB. I think the burning method will be my best option seeing that I do have a compatible PPU. As for the CPU, I believe I have a second one I can populate the board with.
 
Hey Darryl,

I have a couple VS. boards and really only need the roms at this point, especially if I can use the excitebike PPU.
 
Frankenpora,

Thanks for the info. I am actually trying going to use my excitebike VS. board for SMB. I think the burning method will be my best option seeing that I do have a compatible PPU. As for the CPU, I believe I have a second one I can populate the board with.

If you go that route just make sure you have the same EB PPU. Interestingly the (JAPAN) version uses a different one than standard. You can refer to the list on the site I linked. Also, I would encourage you to trade for something on DJ's list. They are'nt making any more of these. The nice thing is that the Upright, and the red tent both use the same board.

You need PPU - RP2C04-0004
 
Last edited:
Actually DJ if he does'nt want it. I don't have anything on your list. But I do have a complete working Atari Xevious PCB in cage if your interested. Also power block etc.
Oh also have a relief pitcher PCB working.
I know it's not likely but hey.

I do suspect that the PPU is the regular one so he may still need it.
 
Back
Top Bottom