Vs. Sky Kid with PCB, MARQUEE, and TOPPER!! - $125.00

blkdog7

New member

Donor 2011
Joined
Feb 10, 2008
Messages
12,197
Reaction score
90
Location
Massachusetts
Rating - 100%
42   0   0
Vs. Sky Kid with PCB, MARQUEE, and TOPPER!! - $125.00

Selling my Vs. Sky Kid with PCB and Marquee. This is currently setup for a single monitor Vs. system (I installed the jumper for the player 2 start).

In the photos below you will see that I have a second set of ROMs and PPU installed on the daughter board. THESE ARE NOT INCLUDED. You will get one set, of ROMS and PPU which is all you need for a single monitor VS. system.

If you want two sets of ROMs and PPUs to run this on both monitors on a dual system (red tent, etc.) then it will be $150 without the marquee.

So, $125.00 with marquee, TOPPER, and one set of chips for a UNISYSTEM

OR

$150.00 with two sets of chips for a DUALSYSTEM

NOTE: Dualsystem play does not have linked play across both monitors. You can play two player simultaneous play but you both need to be on the same side.

If you have any questions, let me know!!!

fs%201.jpg


skykid-kit.jpg


Here's the game running with the marquee in my old Vs. uni cab:

5822106518_fb4bd12f29_b.jpg


fs%202.jpg



VIDEO:

 
Last edited:
I have a Vs. SkyKid that I have trouble with, getting it to start at all is hard, and then the controls are messed up. Player 1 can't fire, and Player 2's up/down controls are reversed. Is this related to the jumper, or should I just get a new board?
 
Back
Top Bottom