Vs. PCB

jtdollard

Member
Joined
Sep 16, 2012
Messages
148
Reaction score
0
Location
Hendersonville, Tennessee
Hey guys I picked up 2 Vs PCBs this week which i believe are bad they keep reseting one has been modded some one soldered a RBI/TKO daughter card to the board. Has any one ever seen that before and are there any comon problems that make these boards reset continually.
Thanks
 
The daughter cards are a major pain. You'll often get resetting and/or scrambled screens when the daughter cards are not seated deep enough or are uneven. Try reseating the game. they require quite a bit of force. Some motherboards also respond differently different games, so you might try swapping the cards.

I haven't seen a game soldered to the board yet. Seems a little extreme, but if that game is resetting, you might check all the solder joints for cracks/gaps. I would probably de-solder the game and track down a new motherboard but that's just my preference (they're pretty easy to find).
 
Yeah its soldered on they removed both the PPU and CPU sockets and Soldered the daughter card down I was hoping some one might be able to tell me to replace a cap and its fixed rather than have to desolder 80 pins
 
Back
Top Bottom