vs joystick rebuild

smello

Member
Joined
Feb 23, 2010
Messages
759
Reaction score
0
Location
Sheboygan, Wisconsin
So I have a 8-way vs joystick on my red tent. One seems really sloppy and loose compared to the others. What part is the most essiential to make it tighter? Spring?

Who's got one? Don't wanna get the wrong one for a fourway or something.
 
Just disassemble the entire thing, clean it, and then put some type of lube on the bearing and the stick. Also make sure there is the small little washer thing above the spring is there like in the manual. Make sure it pulls up about an eighth of an inch smoothly and doesn't stick while it is together. The springs usually stay good in them, but the grease they used gets dust and other crap and it seizes up the stick.
 
Back
Top Bottom