VisionPro that won't adjust to full screen

pacray

Well-known member
Joined
Apr 21, 2007
Messages
2,361
Reaction score
113
Location
Erie, Colorado
I have a VisionPro that won't adjust the picture all the way down (monitor mounted vertically). I have tried using the remote, but once I have the top of the picture on screen, there is still about a 2 inch border at the bottom. Is there an adjustment pot on the chassis itself that will bring the picture down a bit?
 
I am pretty sure there is no Horizontal Width Coil or jumpers on a VisionPro, at least none I can find.
 
There is a white button on the chassis. Push it. Then try adjusting it again. If things get worse, push the white button again...
 
Back
Top Bottom