Vision Pro MTG-1901CN Questions

brokentoken

Well-known member

Donor 6 years: 2019-2024
Joined
May 20, 2007
Messages
2,357
Reaction score
1,470
Location
North Carolina
I am looking for a cap kit for a Vision Pro MTG-1901CN, but haven't seemed to be able to find one.

Visually, this chassis looks almost identical to the Wells-Gardner 19K7300...are they the same/do they use the same cap kits?

Is there a source for remote adjustment boards?
 
Surprised I don't have this list.

Check it against the KT-1915 listing on my site, as well as the 7302 listing on my site. If they match 100%, let me know so I can add that info to the site. If not, and you either order or make a COMPLETE listing, please send it to me thru my site or as a PM here so I can add it....
 
Ha--a great, simple suggestion that didn't even remotely occur to me ! I have two of these Vision Pros right now, and I compared them to your cap lists--it looks like this chassis is *almost* a spot-on match for the Wells 7302.

Here are the differences I found:

* I could not find anything labeled C361 on either of my chassis
* a spot for C413 is silkscreened on my chassis, but it was not populated with a cap on either of the ones I have
* I have a cap at C417 that I didn't see on your 7302 list. Its value is 33uf 250v.
* A few of the caps on my chassis had lower voltage ratings, but the same uf value (I know that the higher voltages should be totally compatible--but I'm not sure if these were "official" upgrades made at the factory or not)

Looks like a virtually identical chassis, though I don't know what could be different with C361 and C413 between the two.
 
Last edited:
The Vision Pro model has a cap on it's remote board, the Wells-Gardner counterpart does not (I don't remember it's value).

Edward
 
The Vision Pro model has a cap on it's remote board, the Wells-Gardner counterpart does not (I don't remember it's value).

Edward

Yes, it does... it's c701 and its value is 50v 10uf.

So, it looks like the 7302 remote adjustment board wouldn't work on the Vision Pro.

Does anyone have a spare remote board for a Vision Pro that they want to sell :)
 
Zanen Electronics phone (806) 829-2780 or 1-888-44-ZANEN

Capkit # 870 for Happ/Tovis MTG-1901CN and MTG-1301CN, 37 capacitors, $8.95

FYI, Tovis manufactures the Happ MTG series.
 
Back
Top Bottom