Virtua Cop 2 - manual

moloch

Member
Joined
Jul 13, 2008
Messages
117
Reaction score
0
Location
Tacoma, Washington
I have a Virtua Cop 2 machine that needs a fair amount of help to get going. Does anyone have a copy of the PDF of the manual? I have seen pdf's of other sega manuals but I cannot find the one for Virtua Cop 2.

Thanks
 
What is it you'd like to know? Virtua Cop2 uses the same boardset as Virtua Fighter 2 for the most part. I have a Virtua Cop 2 so if there's something in particular you'd like to know or a picture of let me know.
 
I need to know where each of the wires goes from the I/O and how the Gun I/O is supposed to be connected to the mainboard. I especially need to know exactly how the final Video is output (because it was my understanding that the I/O for the guns was tied to the video).

I ideally would be able to see a schematic. I can give you the specific CN numbers for the I/O board that I need to know right away, but then I would also need to know exactly what each wire should connect to.

It is a lot. This machine has a lot of stuff that was pulled apart and I found out that a lot of things that looked connected are actually just laying around loose and buried under other wiring.
 
Back
Top Bottom