Video Converter Question

Sectorseven

Active member
Joined
Mar 2, 2010
Messages
1,888
Reaction score
23
Location
Connecticut
I'm wiring the Gonbes GBS-8200 to a Jamma harness using the 8 pin RGB connector it comes with. The connector has horizontal and vertical sync, but the Jamma pinout just has plain old "sync." So what am I connecting to what?
 
I'm wiring the Gonbes GBS-8200 to a Jamma harness using the 8 pin RGB connector it comes with. The connector has horizontal and vertical sync, but the Jamma pinout just has plain old "sync." So what am I connecting to what?

Try using the Horizontal sync, wait try this
8pin EGA/CGA Input Interface ;Definitions:

1、Ground (GND) use for ground from jamma

2、Ground (GND) not used

3、(VS) not used

4、(HS) not used

5、Sync = Sync from jamma

6、(B) blue video from jamma

7、(G) green video from jamma

8、(R) red video from jamma.
 
Last edited:
Back
Top Bottom