Vendorlator vf165 coin mech question

Robran68

Well-known member

Donor 2011
Joined
Feb 17, 2008
Messages
3,619
Reaction score
36
Location
Fraser, Michigan
Anybody know how to rig up the coin mech for free dispensing?? I noticed a kit do do this on a website for $26 but it's just a couple jumper wires with a micro switch.
 
Anybody know how to rig up the coin mech for free dispensing?? I noticed a kit do do this on a website for $26 but it's just a couple jumper wires with a micro switch.


I have been looking for that site so I could send you the info, but it looks like you beat me to it. Do you unload it ok?
 
Yeah I found it but I have an idea....after looking at the coin mech I think I'm going to simply set it the dips to 25 cents. Then take the two wires to the 25 cent microswitch and wire them up to a small momentary button outside the machine somewhere to simulate putting in a quarter. ;)

Oh yeah it unloaded fine with help from a buddy of mine.
 
After looking at the coin mech I think I'm going to simply set it the dips to 25 cents. Then take the two wires to the 25 cent microswitch and wire them up to a small momentary button outside the machine somewhere to simulate putting in a quarter.


For anybody interested this worked like a charm!
 
Im interested post up details :)
also your coin mech a 24v or 110?

Not sure but it's a Coinco S75-9800 model coin mech. Probably would work with most coin mech models also. I didn't hack the wiring either, just crimped on some quick connects and hooked up a RS momentary button....(always open) version.
 
Last edited:
Back
Top Bottom