Vendo 56 bottle jam issue

PeRFiDiouS

In Memoriam
Joined
Feb 20, 2008
Messages
2,258
Reaction score
13
Location
Texas
I have a Vendo HA56B that vends 8oz bottle from the side door pull rack. A few times the bottles have gotten stuck halfway out. This results in it hanging half in and half out of the machine. If you coin the machine again it will just buzz and not release. I know I got one unjammed before but for the life of me I can not remember how. Can someone refresh my memory as how to unjam this thing and maybe tell me why this is happening? Any help/advice would be greatly appreciated.

VendoHA56B-1_.jpg
 
well

Have you tried to power it down and manually push back any mechs which may engage?
And AWESOME looking machine btw!
I have a Vendo HA56B that vends 8oz bottle from the side door pull rack. A few times the bottles have gotten stuck halfway out. This results in it hanging half in and half out of the machine. If you coin the machine again it will just buzz and not release. I know I got one unjammed before but for the life of me I can not remember how. Can someone refresh my memory as how to unjam this thing and maybe tell me why this is happening? Any help/advice would be greatly appreciated.

VendoHA56B-1_.jpg
 
I have a Vendo HA56B that vends 8oz bottle from the side door pull rack. A few times the bottles have gotten stuck halfway out. This results in it hanging half in and half out of the machine. If you coin the machine again it will just buzz and not release. I know I got one unjammed before but for the life of me I can not remember how. Can someone refresh my memory as how to unjam this thing and maybe tell me why this is happening? Any help/advice would be greatly appreciated.

VendoHA56B-1_.jpg

the shelves in those have a few diff slots in which they can sit, check and see if they are all the same. if i remember right there is a small box at the bottom of the first door you open ,which has a trigger like system in it , unplug the machine take the cover off the box and puch down on the bar or pull up? that will allow you to pull out all the rows at once,then oil the part were the bottles come out,ron
 
I've got a Vendo 90 which is basically the same unit with a couple more shelves. I'd suggest unloading the machine and lubricating the entire bottle vending mech from top to bottom. Make sure the solenoid under the cover at the base of the unit is moving freely and check it's adjustment.

Sometimes if it's out of adjustment, when you pull a curved Coke bottle out, it registers as a *serve* on the thinner waist portion of the bottle, causing a jam.
 
Back
Top Bottom