FS Game: Vectorbeam Starhawk (in Phoenix, AZ) not Cinematronics

inferno

Member

Donor 2013
Joined
Dec 4, 2010
Messages
114
Reaction score
2
Location
Arizona
Rating - 100%
13   0   0
Vectorbeam Starhawk (in Phoenix, AZ) not Cinematronics

I believe this machine arrived non-working. It appears to be complete except for the upper marquee bracket and back door. I acquired a marquee for it separately and will include it not installed. The exterior could use a good cleaning. Side art has some crinkles. A bite of particle board was taken out of the front left edge about coin door height. More pictures will be added when possible. SOLD.
 

Attachments

  • IMG_0308b.jpg
    IMG_0308b.jpg
    68.3 KB · Views: 98
  • IMG_0310b.jpg
    IMG_0310b.jpg
    94.6 KB · Views: 109
  • IMG_0312b.jpg
    IMG_0312b.jpg
    97 KB · Views: 96
  • IMG_0318b.jpg
    IMG_0318b.jpg
    90.4 KB · Views: 93
  • IMG_0319b.jpg
    IMG_0319b.jpg
    79.9 KB · Views: 92
Last edited:
more pics...
 

Attachments

  • IMG_0325b.jpg
    IMG_0325b.jpg
    51 KB · Views: 40
  • IMG_0314b.jpg
    IMG_0314b.jpg
    90.8 KB · Views: 42
  • IMG_0315b.jpg
    IMG_0315b.jpg
    86.3 KB · Views: 37
  • IMG_0316b.jpg
    IMG_0316b.jpg
    86.7 KB · Views: 36
I think the board being a vectorbeam is not that uncommon... I think they used what they could get their hands on. The marquee says cinematronics, So I would say its that..
 
Oops, good catch. I didn't have the marquee with it so I was going by the Vectorbeam PCB and metal plate on back of cabinet. Thanks.

I think the board being a vectorbeam is not that uncommon... I think they used what they could get their hands on. The marquee says cinematronics, So I would say its that..
 

Attachments

  • IMG_0324b.jpg
    IMG_0324b.jpg
    32.5 KB · Views: 27
Back
Top Bottom