Valley Cougar Dart Parts NEEDED!

mikelaka

New member
Joined
Dec 30, 2002
Messages
227
Reaction score
0
Location
Chicagoland/Northwest Indiana
Rating - 0%
0   0   0
I have a Valley Cougar dart and need the following

1. n65 switch assembly,
2. 207-0048 rubber sheet american,
3. 206-0272 target hinge,
4. 201-0111 adjustment screws,
5. 205-1022 dart catching ring,
6. 201-0100 metal screws,
7. ev5 target harness.

Essentially, I only have the American plastic segment matrix, and need everything else including the clear matrix switch assembly, the rubber mat, and black outter dark catcher ring.. I have already contacted SHELTI.. but I was hoping someone had parts on a shelf?

I did purchase the clear matrix switch assembly that is already mounted to the plywood, but no idea if it really even works properly.

ANY help would be greatly appreciated!

Mike
 
I have a Valley Cougar dart and need the following

1. n65 switch assembly,
2. 207-0048 rubber sheet american,
3. 206-0272 target hinge,
4. 201-0111 adjustment screws,
5. 205-1022 dart catching ring,
6. 201-0100 metal screws,
7. ev5 target harness.

Essentially, I only have the American plastic segment matrix, and need everything else including the clear matrix switch assembly, the rubber mat, and black outter dark catcher ring.. I have already contacted SHELTI.. but I was hoping someone had parts on a shelf?

I did purchase the clear matrix switch assembly that is already mounted to the plywood, but no idea if it really even works properly.

ANY help would be greatly appreciated!

Mike

not sure if you still need this stuff,

but i have pretty much everything from a valley cougar!

the cab was shot and falling apart, so i gutted it,

ive got all the boards,ribbons,buttons,segments,outer black ring,screws,power supply,the board with the sensor pad and black rubber mat

lmk

darren
 
clear matrix

I need the clear matrix for a cougar 8 if u still have it
 
Back
Top Bottom