Using a Centipede CP with jamma

mochaman

Active member
Joined
Feb 10, 2012
Messages
898
Reaction score
35
I would like to use a fully populated Centipede CP for a conversion to a bowling game. What I want to know is how to wire the P1 & P2 buttons so they light up. I know +5 goes to them but what or where does it go from there? I tried looking at the schematics but it only shows to/from PCB. Any help would be appreciated. Thanks in advance.
 
if you're using a switching power supply you could just run the lamps directly to the -5V on your switcher.

edit: this is how i wire the coin lights on my jamma games, i don't know if your buttons NEED +5V, i like to use the -5V since my games don't use that voltage for anything else and i'm not adding any extra draw on the positive 5 volt line.
 
Last edited:
Back
Top Bottom