Us vs Then laser project

pocketchange

New member
Joined
Dec 27, 2008
Messages
57
Reaction score
0
Location
cross plains, Wisconsin
I am working on a Us vs Them and need someone to help me with a few questions. I am not very knowledgable about the game and would like to talk with someone that has restored one and gone through some of the same problems. I am getting some sounds when the laser disk is playing almost like static. It will get to the point where just the sounds from the sound board. This will happen at different times of game play. The game will also be flaky when starting. It will go into the stop and start mode but wont go into seeking fram modes all the time. The sound from the game boards sounds clear only the sound form the laser player is what I am having problems with...
My thoughts are that its the audio on the laser player..I only have one laser player that works the others have issues. I would like to rule out any other possibiltys before buying a replacement laser card and player.. Thanks Bryan Would you email me at [email protected] if you can help me..
 
Only thing I can think of is to check you have the audio wires from the player around the right way, as one carries a synch signal, which may explain why you're getting static. You could try swapping them left to right.

Try this site: http://www.d-l-p.com

That's where the best laser heads hang out.

Jeff K does post here from time to time.

- J
 
Last edited:
Back
Top Bottom