Arcade1VA
Well-known member
Updated Games and Parts For Sale...Stuff Added
Several people have asked me to repost and update my games and parts for sale, so here you go:
Games:
Space Wars (SOLD)
Solar Quest (will part as full kit only)
Baseball II (will part as full kit only)
Alley Master (will part as full kit only)
Double Play (no pic yet)
Scion
Power Play
Indy 500 sitdown
Drag Race
Asteroids Deluxe cocktail
Empty Williams cocktail
Parts (prices do not include shipping):
19" Working G07 Horiz. monitor $100
19" Working G07 Horiz. monitor $100
19" Working WG4900 Vert. monitor (needs fine tuning) $80
19" Working WG4600 vert. monitor $80
19" Working WG4600 Horiz. monitor $80
13" WG4800 monitor (everything but the tube) $45
Wells Gardner 25" standard res. K7400 working chassis w/ yoke and degauss $65 SOLD
Wells Gardner (small neck) K7000 yoke (working) - $7
Wells Gardner K4600 RGB daugther card (working) - $5 SOLD
G07 Metal chassis w/ all screws, degauss coil, metal sheild, and grounding strap (no electronics or tube) $10
Under over coin door $25
Single slot coin door (new) - $15
Clear glass bezel (23" x 21") - $5
(3) 3/16" plexi bezels (see pics for dimensions) $3 ea
19" Atari black cardboard bezel - $7
19" Black ABS bezel - $3
(2) 19" Thin black carboard bezels (see pics for dimensions) - $1.50 ea
24" Flourescent fixture (uses rapid start tubes so there is no starter, but could be wired for a traditional bulb) - $7
Big Event Golf manual - $2
Great 1000 Miles Rally manual - $2
Galaga '88 manual - $12
Galaga '88 marquee underlay - $15
4" speaker (new) $2 ea
Speaker grills - $2 per set
7 1/2" x 10" speaker grill - $2
Leg levelers & bushings (see pics for prices)
Atari Big blue capacitor (working) - $5
20' New 1/2 Smooth T-molding - $5
Used 3/4" smooth black t-molding (in good condition, enough for 2 full uprights) - $7
Various marquee and support brackets - $1 ea
Here is a link for pics and a desription with prices for each:
http://cid-512b3312e3ab6c92.skydrive.live.com/browse.aspx/Games for Sale
Click on each thumbnail for a larger pic, a description and the asking price. The game prices are firm, but I will entertain reasonable offers only. All are working games, and I do not part out dedicated games... They are located 20 minutes south of Roanoke, VA. Cash & carry, first come first served. No PayPal on these, sorry. I can make screen shots available on request, but only for serious inqueries. The games I have mentioned could be sold as kits, would include the boards, wiring, control panel and marquees, and can be shipped (I will take Paypal on a kit if you want it). The coin doors, AC portions, and monitors would be separate, but for sale. I appreciate your understanding. Anyone who is interested in these, please PM me. Thanks.
I am out of monitor boxes so they will have to be picked up here...
I can deliver if you live within a reasonable distance of Roanoke, VA., for a fee to cover gas and my time, but I am sure I can beat any shipping quote you would get...
More stuff to come, so if you are looking for any other items (i.e. buttons, electrical components, cable clamps, pal nuts, etc.) ask as I probably have what you need.
Please PM me (with email) for pics of anything you are interested in. I do not have this stuff packaged up so I can give you an estimate only on shipping costs. Thanks.
Several people have asked me to repost and update my games and parts for sale, so here you go:
Games:
Space Wars (SOLD)
Solar Quest (will part as full kit only)
Baseball II (will part as full kit only)
Alley Master (will part as full kit only)
Double Play (no pic yet)
Scion
Power Play
Indy 500 sitdown
Drag Race
Asteroids Deluxe cocktail
Empty Williams cocktail
Parts (prices do not include shipping):
19" Working G07 Horiz. monitor $100
19" Working G07 Horiz. monitor $100
19" Working WG4900 Vert. monitor (needs fine tuning) $80
19" Working WG4600 vert. monitor $80
19" Working WG4600 Horiz. monitor $80
13" WG4800 monitor (everything but the tube) $45
Wells Gardner 25" standard res. K7400 working chassis w/ yoke and degauss $65 SOLD
Wells Gardner (small neck) K7000 yoke (working) - $7
Wells Gardner K4600 RGB daugther card (working) - $5 SOLD
G07 Metal chassis w/ all screws, degauss coil, metal sheild, and grounding strap (no electronics or tube) $10
Under over coin door $25
Single slot coin door (new) - $15
Clear glass bezel (23" x 21") - $5
(3) 3/16" plexi bezels (see pics for dimensions) $3 ea
19" Atari black cardboard bezel - $7
19" Black ABS bezel - $3
(2) 19" Thin black carboard bezels (see pics for dimensions) - $1.50 ea
24" Flourescent fixture (uses rapid start tubes so there is no starter, but could be wired for a traditional bulb) - $7
Big Event Golf manual - $2
Great 1000 Miles Rally manual - $2
Galaga '88 manual - $12
Galaga '88 marquee underlay - $15
4" speaker (new) $2 ea
Speaker grills - $2 per set
7 1/2" x 10" speaker grill - $2
Leg levelers & bushings (see pics for prices)
Atari Big blue capacitor (working) - $5
20' New 1/2 Smooth T-molding - $5
Used 3/4" smooth black t-molding (in good condition, enough for 2 full uprights) - $7
Various marquee and support brackets - $1 ea
Here is a link for pics and a desription with prices for each:
http://cid-512b3312e3ab6c92.skydrive.live.com/browse.aspx/Games for Sale
Click on each thumbnail for a larger pic, a description and the asking price. The game prices are firm, but I will entertain reasonable offers only. All are working games, and I do not part out dedicated games... They are located 20 minutes south of Roanoke, VA. Cash & carry, first come first served. No PayPal on these, sorry. I can make screen shots available on request, but only for serious inqueries. The games I have mentioned could be sold as kits, would include the boards, wiring, control panel and marquees, and can be shipped (I will take Paypal on a kit if you want it). The coin doors, AC portions, and monitors would be separate, but for sale. I appreciate your understanding. Anyone who is interested in these, please PM me. Thanks.
I am out of monitor boxes so they will have to be picked up here...
I can deliver if you live within a reasonable distance of Roanoke, VA., for a fee to cover gas and my time, but I am sure I can beat any shipping quote you would get...
More stuff to come, so if you are looking for any other items (i.e. buttons, electrical components, cable clamps, pal nuts, etc.) ask as I probably have what you need.
Please PM me (with email) for pics of anything you are interested in. I do not have this stuff packaged up so I can give you an estimate only on shipping costs. Thanks.
Last edited:

