Douchka
Member
I just want this stuff gone. All untested.
3 harnesses - all appear to be cut here or there
Vs PCB - rusted battery leads/chip on one of the chip sockets bent pin. I did pull a working SMB off of it a year ago. Do not recall if it had any issues past my initial testing on this board.
RF cage - This was tested. It will hold the PCB
Filter board
$35 shipped
3 harnesses - all appear to be cut here or there
Vs PCB - rusted battery leads/chip on one of the chip sockets bent pin. I did pull a working SMB off of it a year ago. Do not recall if it had any issues past my initial testing on this board.
RF cage - This was tested. It will hold the PCB
Filter board
$35 shipped