Unknown Vendo VMax Spacers?

SilverDuck

New member
Joined
May 27, 2009
Messages
2,389
Reaction score
18
Location
Minnesota
I bought a Pepsi Vendo multi-price machine, and inside the door, wrapped in bubble wrap, were these two "spacer" looking things. They are about 14" long each, and they clip into the sides of the columns vertically. They do not look like anything I am finding on the Vendo setup PDF. They are about 14" long, 1/2" wide each, and made of aluminum. Any guesses what they are?
 
4326747994_b7ea6ac4bf_o.jpg
 
if i remember right there for odd bottles like gatoraid so they dont fall in on each other
got rid of most my vmax mach. i like the new dixie alot better
 
Thanks. I guess they are not needed, as I do Gatorade (one deep) with no spacers and they drop just fine. The only things I can't vend are the 16.9oz bottles because they are too skinny and they try to drop 2 at a time, and jam things up.
 
I really like my Vendo VMax, but it is a very picky machine. Right now I have it vending like a champ on 20oz Vitamin Water, 20oz Gatorade, 24oz Pepsi/Mt Dew bottles, 16oz tall cans of Monster and Rockstar, and 12 oz cans. The 12oz cans only vend 1 deep, unless I buy the shim kit. The 16oz cans vend 2 deep without shims.
 
I never really noticed, and if I did, I don't recall. I'll take a peek the next time I am at that location.
 
Back
Top Bottom