Unknown Kortek chassis id

luke9511

Well-known member
Joined
Aug 21, 2009
Messages
1,174
Reaction score
63
Location
Tennessee
Hey everyone can anyone here help me to identify this chassis? I have tried the different numbers on the yellow labels when looking for a cap kit but I get different results so I am not sure which is the correct one
 

Attachments

  • IMG_7173.jpeg
    IMG_7173.jpeg
    695.2 KB · Views: 26
  • IMG_7174.jpeg
    IMG_7174.jpeg
    403.7 KB · Views: 26
  • IMG_7175.jpeg
    IMG_7175.jpeg
    562.7 KB · Views: 26
I found a few related threads/links, just googling for 'kortek KTMF'. There are a bunch more than these:





 
I found a few related threads/links, just googling for 'kortek KTMF'. There are a bunch more than these:





yeah i have already seen those but that kit doesnt seem to match any of the numbers on my chassis but thanks though, hopefully the flyback on this is still good
 
yeah i have already seen those but that kit doesnt seem to match any of the numbers on my chassis but thanks though, hopefully the flyback on this is still good

It seems like it's not a clearly marked chassis, if you read the threads. However people refer to it with different names. In this case you want to be comparing the shapes and components on the chassis, not looking at numbers.

It's a Kortek, and it's 25". The thread below calls it a KTMF 2641M. It also apparently looks like a similar chassis that was sold as a Sharp Image SI-134 (which might explain why it doesn't look that much like other Korteks.) Maybe they licensed it from or to Sharp Image, which might explain why there's no obvious model printed on it.



If that's the case, it looks like the kit from APAR should work.

Paging @security0001, as he may be able to confirm more.
 
It seems like it's not a clearly marked chassis, if you read the threads. However people refer to it with different names. In this case you want to be comparing the shapes and components on the chassis, not looking at numbers.

It's a Kortek, and it's 25". The thread below calls it a KTMF 2641M. It also apparently looks like a similar chassis that was sold as a Sharp Image SI-134 (which might explain why it doesn't look that much like other Korteks.) Maybe they licensed it from or to Sharp Image, which might explain why there's no obvious model printed on it.



If that's the case, it looks like the kit from APAR should work.

Paging @security0001, as he may be able to confirm more.
my best guess is that should be the kit but with all the different variations and sizes its truly hard to say for sure. the OP can email me a list through our site from his chassis and i can see what best matches it.
 
Back
Top Bottom