Unknown Dixie Narco 7Up machine

sleepyhed

Member
Joined
Jul 20, 2008
Messages
104
Reaction score
0
Location
Madison, Wisconsin
Hello all,

I've spent a good amount of time trying to determine exactly what I have but still haven't found anything conclusive.

It's a 6-select / dual-adaptable (12 oz cans or bottles w/ shims) unit but I cannot find an image of this machine confirming what the exact model is. Inferring from a .pdf I found discussing bill acceptor compatibility, I think it's a 90-series. This .pdf did mention a 56" 7Up model which is the best match I've come across.

Here are the pics. Maybe someone here can shed some light on this for me. Like I said and the pic shows, it a smaller 56" tall unit. Any help is appreciated!
 

Attachments

  • DSCF1751.jpg
    DSCF1751.jpg
    63.2 KB · Views: 39
  • DSCF1754.jpg
    DSCF1754.jpg
    65.7 KB · Views: 31
  • DSCF1755.jpg
    DSCF1755.jpg
    79.9 KB · Views: 33
  • DSCF1756.jpg
    DSCF1756.jpg
    67.7 KB · Views: 27
Yep. That's about as much as I can tell.

Also, one of the electrical diagrams is dated 1979, if that helps any.

Thanks!
 
there have been so many model variations and really varies depending on which part of the country your in for some models. back east there are alot of models that we dont get over here. but really most of them function the same as long as they are similar styles the models typically dictate the size of the machine.
 
Machine ID

It looks like a older version yet internals bays and everything even layout and all look like my machine but older. Mine is a Dixie Narco DNCB 276/162-6
I see you have the middle bays exactly the same too..
Hope this aims a lil closer in the right direction for you.
 
Last edited:
What can you tell me about this DixieNarco 7up machine

Bought a machine identical to the picture shown a few months ago. Works great, paid 150 for it...needs a good cleaning but I want some info on the machine. I have tried searching the model number and i get no hits. The model number on the plate says DNTP232-8. I had to put a new coin mech in it because the one it came with was set for free vend. Is this machine capable of vending bottles? This is my first machine so any help would be greatly appreciated.. THanks in advance.
 

Attachments

  • pop machine.jpg
    pop machine.jpg
    4.9 KB · Views: 17
Is this machine capable of vending bottles? This is my first machine so any help would be greatly appreciated.. THanks in advance.

it will do 16.9 oz water bottles but only do them in the single wide column and adjust the back spacer to the proper depth and the cam on the motor to cycle 1 product. you *may* be able to do some other bottles but you will have to f*ck with it on your own time haha.
 
Bought a machine identical to the picture shown a few months ago. Works great, paid 150 for it...needs a good cleaning but I want some info on the machine. I have tried searching the model number and i get no hits. The model number on the plate says DNTP232-8. I had to put a new coin mech in it because the one it came with was set for free vend. Is this machine capable of vending bottles? This is my first machine so any help would be greatly appreciated.. THanks in advance.

i think its a dixie 232 as it should hold 232 cans
 
Back
Top Bottom