Museum of the Game® & International Arcade Museum® Forums
I picked this up at the end of the year with 7 other games out a barn in Arkansas. Totally Mr Do! out with screen burn and all. I tried sell/trade it with no action I thought would be impossible to find everything I needed but then got reminded where I am 
The harness that was in it, im guessing mr do. it was hacked onto the power supply and has an edge connector. I peeled the overlay off too reveal what's there of the graphics and there is two holes on each side of flight stick hole sadly. I think the cabinet itself is pretty solid and not bad cosmetically. The bezel super flakey! It is at my art department.... mom's. I used triple thick on it but she has been authorized to do whatever it takes
This got kicked off when redfive offered up a complete uprights harness and cage although I will have to test / and/or repair. I also have some of the bits I don't need like the rank pcb. I will have to figure out what to do with the unused connectors and wires in the harness and I would like to know what a Gorf Driver Board is for. It seems to have only been used in cocktails and cabarets, not uprights. I am going to keep but I am *not* going to use the original power supply, I am using a switcher. I also know it may be impossible to find unlike luckola ralphola, but I need a marquee! I will probably get one made on plexi close to the same size as the cut down mr do that was in it because it actually held in well. I never had a cabaret or a gorf any size so expect some drama!
It's been a wild ride but a flight stick will be here in a week or so I won't be using it yet lol.
The harness that was in it, im guessing mr do. it was hacked onto the power supply and has an edge connector. I peeled the overlay off too reveal what's there of the graphics and there is two holes on each side of flight stick hole sadly. I think the cabinet itself is pretty solid and not bad cosmetically. The bezel super flakey! It is at my art department.... mom's. I used triple thick on it but she has been authorized to do whatever it takes This got kicked off when redfive offered up a complete uprights harness and cage although I will have to test / and/or repair. I also have some of the bits I don't need like the rank pcb. I will have to figure out what to do with the unused connectors and wires in the harness and I would like to know what a Gorf Driver Board is for. It seems to have only been used in cocktails and cabarets, not uprights. I am going to keep but I am *not* going to use the original power supply, I am using a switcher. I also know it may be impossible to find unlike luckola ralphola, but I need a marquee! I will probably get one made on plexi close to the same size as the cut down mr do that was in it because it actually held in well. I never had a cabaret or a gorf any size so expect some drama!
It's been a wild ride but a flight stick will be here in a week or so I won't be using it yet lol.