UMK3 owners......

sohchx

Active member
Joined
May 12, 2007
Messages
3,755
Reaction score
11
Location
frederick, Maryland
I have a question. I have one of these in a dynamo cab,very clean install. My problem is I cannot adjust my in game menu settings. The manual says that there should be a test button on the coin door and there is not. I don't even see a loose wire anywhere in the cab as evidence that a button existed,thats how clean the setup is. I found a small white button on the PCB but all that does is resets the game. My main thing is adjusting the volume,there looks to be no way to do it. My game runs an automatic ROM and sound check at power up,should I be able to get into the test menu during those processes and is the manual not telling me that I can do so?
 
Use dip switch 1 to enter Test menu. Then you can go and change volume and other settings.

Dip Switch 1 Setting Table
Sw.8 Coinage (Off=Dip Switches, On=CMOS)
Sw.7 Pricing
Sw.6 Pricing
Sw.5 Pricing (Free Play = On, On, On)
Sw.4 Country
Sw.3 Country (USA = Off, Off)
Sw.2 1 Count/Coin Totalizer (wtf?)
Sw.1 Test Switch (Game Mode=Off, Test Mode=On)
 
Use dip switch 1 to enter Test menu. Then you can go and change volume and other settings.

Dip Switch 1 Setting Table
Sw.8 Coinage (Off=Dip Switches, On=CMOS)
Sw.7 Pricing
Sw.6 Pricing
Sw.5 Pricing (Free Play = On, On, On)
Sw.4 Country
Sw.3 Country (USA = Off, Off)
Sw.2 1 Count/Coin Totalizer (wtf?)
Sw.1 Test Switch (Game Mode=Off, Test Mode=On)

Many thanks sir!!!!
 
Back
Top Bottom