TZ Problems ahhhhhhhh!

simpsons99

New member
Joined
Apr 20, 2003
Messages
4,448
Reaction score
5
Location
Snohomish Washington
Hi Guys I am having problems with my TZ Pinball machine

First it was not counting the balls right .. Not reloading the Gumball machine .

When ball is locked into Gumball Machine it does a ball search and kicks a ball from the Gumball machine . I had the setting for 4 balls being stored in the Gumball machine set . I know 3 Balls is factory

For some reason the outlines would only hold 2 . When 3 balls are down there .. it would kick out 2 balls . Not just one . It seems to want less and less Pinballs in the machine .



Then after all this happened All Flippers in the game completely stopped working .

The only thing I did before this happened I put Leds in the back glass .. Then started playing a few games .
 
You may have knocked out your 12 volt supply to your optic switches. Check your fuses. The one by its self on the top left of the big board in the back box.

Rodger Kilgore
 
ty guys for your posts .

I messed with everything inside the machine and then turned it on and no flippers still .

Then I did the tests it told me about a few flipper op switches not working right or something .

I pressed help in test mode. I pushed the flippers and they worked in help mode .. I lowered the playfield again .. coined up a game and the flippers worked!

This game is just being strange ! go figure it's TZ

It still does not shoot the ball out of the Gumball machine has a ball search done then kicks the ball out of it .
 
Then it's just an optic switch in the ball through, gumball or ball locks. Put it in switch test and see which is not working all the time. You can look at it with the camera on your phone to see if it's the emitter.

Rodger Kilgore
 
Back
Top Bottom