TZ Clock LED Instructions???

Michael Roma

Active member
Joined
May 17, 2008
Messages
1,404
Reaction score
18
Location
Woodbridge, Virginia
Does anyone have or direct me to a detailed writeup of how to convert a stock TZ clock board to LEDs?

I saw the archived TXpinball one but the pictures are too small to see the details.

Thanks,

- Mike
 
Thanks... I ended up watching TOP #3 again and comparing what was on there with the picture you provided and the TXPinball site.

Shaggy on TOP #3 says to use 1/2 watt 100 ohm resistors, yet the picture looks like they have 1/2 watt 47 ohm resistors in there (if I calculated the colors correctly). TheTXPinball site used 1/4 watt 100 ohm resistors. I ended using 1/2 watt 100 ohm resistors with 11,000 mcd LEDs.

End result looks pretty good.

- Mike
 
Back
Top Bottom