FS Parts: Two Multicade LCD Screens 4:3 ratio $100 shipped

TheDrewster

Well-known member

Donor 2012
Joined
Oct 5, 2008
Messages
7,668
Reaction score
314
Location
Reno, Nevada
Rating - 100%
112   0   0
http://www.ebay.com/itm/110997137464?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

I bought two of these displays but realized I didnt know how to change the inputs, which sucks, because I really wanted to use these with my multicades. These fit inside a midway cocktail perfectly and they have a good viewing angle. I am just not savvy enough to find out how to change the input to the VGA for the multiboard. They are currently set to AV1.

I am selling both displays for the same amount I paid for them on eBay, but I will let them go if someone buys them both for $100 shipped.
 
FYI, Im pretty sure that on a 60-1 you need to switch one of the dip switches for VGA output.
 
FYI, Im pretty sure that on a 60-1 you need to switch one of the dip switches for VGA output.
I pretty much made the same mistake and ended up spending $200 extra than I needed to restoring my Galaga machine because I didn't know this. Don't make the same mistake!
 
@Zoma & @tjc02002
I dont think you guys understand the problem Drew is having. The equipment input has to be changed, not the output of the multi.
 
Back
Top Bottom