Two Channel Stereo to a Single mono speaker

louisurfer

New member
Joined
Jun 6, 2007
Messages
825
Reaction score
3
Location
Portola Hills, California
Okay, I'm trying to put a Smash TV and Total Carnage switchable in the same cabinet. The boards aren't plug-n-play compatible as the Audio is different. They're going into a cabinet with a single speaker and I'd rather not cut holes to add additional speakers for T.C.

Is there a way to thread both channels into a single without damaging anything?
 
Okay, I read that just simply tying L and R together is pretty crude and might result in some distortion and may possibly kill the amp?

Gonna try this:

L---10K---|
...............|----Mono-----speaker -
R---10K---|

Grnd---------------------Speaker +

10k or 1k resistors, will have to measure...
 
Sorry guys but STV is mono and TC is definetely two channel stereo.

I had +/- on TC hooked up to a single speaker and it sounded like garbage.

They're both going into a 2 in 1 conversion cabinet (old joust cab) and I need to do some tweaking.

On my way to rat shack to get a couple of 8ohm resistors to do a single speaker mod.
 
Sorry guys but STV is mono and TC is definetely two channel stereo.

I had +/- on TC hooked up to a single speaker and it sounded like garbage.

They're both going into a 2 in 1 conversion cabinet (old joust cab) and I need to do some tweaking.

On my way to rat shack to get a couple of 8ohm resistors to do a single speaker mod.

Capacitvely couple both line-level inputs before the audio amp....
 
Back
Top Bottom