tv donor tube swap question b k #3 adapter

gatordad

Well-known member
Joined
Aug 29, 2007
Messages
1,853
Reaction score
79
Location
Illinois
I have several extra frames laying around I have a galaga with severe burn or at least too much for my liking so I started looking for a tube donor

I picked up a free tv made in Jan of 1979
tube number is not listed in the bk manual however adapter number 3 fits like a glove
it has 10 pins
the tube number is mv19vkjp22

Is this good for anything or should I put it back in the electronics recycle bin
Since the neck and socket is larger than what I have seen before (#3 vs #23) I figure I would ask.
 
It is listed in the manual, the 'MV' before the tube number is a manufacturer code. The manual states that it would be rejuved with a CR16. I don't know of any arcade chassis that would fit.

I don't have a drawing for CR3 or CR16 but my guess is they use the same housing with a different pin out and that is why your CR3 fits...
 
Back
Top Bottom